Hardware

Specifically designed for halyard applications, these shackles feature a closed eye section at the top to retain the halyard at all times and a captive shackle pin to avoid accidental dropping and loss. The halyard retaining pin is removable to allow...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. This micro riser has a 15 degree angle. Height (mm)19 mm Height (in) 3/4 in Length (mm)48 mm Length...

Black anodized tiller & extension comes with deluxe universal joint, which can be removed if needed and the internal rope core strengthens the joint. Black anodized aluminum tiller and extension Deluxe universal joint allows extension to be...

'Ring dings' or 'split rings' prevent pins from falling out on the boat. These rings are a 5/8 inch diameter and sold in 10 pack. Material - Stainless Steel Diameter - 5/8 Inch Packaging - 10 Pack

Harken cam cleats utilize a system of multiple rows of ballbearings allowing the line to be cleated by snapping down rather than drawing through. The cams are design to provide maximum holding power without destroying the line. This includes smooth...

Large stainless eyestrap from Harken. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J/22 Traveler Block Eyestrap (x2)    

1/4 inch x 3/4 inch stainless steel clevis pin with zinc finish from Ronstan. Features a 3/4 inch grip length (distance between cap and pin hole) and 29/32 inch total pin length. Pin Diameter is 1/4 inches Pin Grip Length is 3/4 inch Sold individually...

This stainless steel eyestrap provides the attachment point for the boom blocks on the 420, FJ, V15, and Laser. Original Equipment Stainless Steel 40mm Hole Spacing 19mm Eyestrap Height

The fine tune stay adjuster provides for a quick and easy way to adjust stay tensions. It greatly reduces the risk of losing the stay when adjusting rig tension. 316 stainless steel Pin - 3/16 inch Increment Length - 5/32 in. Qty. Adjustment Settings -...

The horn cleat is perfect for tying off halyards securely. Used on a variety of small sailboats, including the Sunfish for securing the main halyard. 3-3/4 inch length. Black anodized aluminum. Commonly found on Sunfish deck for main halyard cleating.

Tiller extension for Hobie Bravo with EZ Loc style tiller assemblies. Includes hinge at base of extension. Purchase Hiking Stick Yoke Connector to complete attachment separately. Aluminum tiller extension for Hobie Bravo Hobie part # 90550011 Use...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.. Height (mm)22 mm Height (in) 7/8 in Length...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees. Add to a standard Harken cam cleat (not included). ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat...

Standard tiller, standard extension, and standard universal joint. Both the tiller and extension are built with silver anodized aluminum. Constructed with silver anodized aluminum Mounted, non-releasable universal joint is ideal for inexperienced...

Forged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. This shallow bow shackle shape is best for multidirectional loads and proportionally wider for their length than regular bow shackles. Shackle...

This retaining clip works well for securing rudders and large pins. Great for the Tasar and Moth. Quick and easy to attach plus you can tie it in! Sold individually Stainless steel 3/32" thick 5/8" Diam.