Hobie 16

  RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

1/4 inch diameter clevis pin with a 1 3/16 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 1/4 in (6.5 mm) Pin Grip Length (B) is 1 3/16 in (30...

Adjust the level of the entire system, ring and handle. Always have the trapeze handle at the proper comfortable to reach level. Crew can move fore and aft to extremes and maintain efficient and comfortable trapezeing level. Bungee gives constant upwards...

Tube vents are used on the pylons of the Hobie 14/16 to allow the air in the hulls to expand and contract with temperature changes without causing damage to the hulls. Fits Hobie 14 and Hobie 16   RESOURCES & SUPPORT Hobie Cat Parts Locators...

Batten that is 67 1/2", not tapered. Availability of the correct batten has often been a problem. The various models of Hobie Cats all use different batten and taper lengths. In earlier years, each model Hobie used a different color batten. The battens...

Replacement 93 inch luff track for Hobie 16 with CompTip on mast. This is an oversized item.Oversize Shipping Information This item is considered oversize due to length and/or weight and not eligible for standard shipping. Oversize ground shipping is...

White racing jib for the Hobie 16. Uses velcro closures and tensioned battens so there is less halyard hangup. Battens sold separately.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Standard bridle vane wind indicator from Hobie Cat. This durable Mylar wind vane  goes on the front adjuster above bridle wires and hangs down to assist with reading the wind direction. It has excellent light to moderate air response, allowing...

Shroud anchor pin for Hobie Cat masts. Use anchor bar to secure under lip of hull.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

The Hobie 'Kick Back Kit' returns rudders to locking position quickly and effortlessly. Really great when sailing in weed filled waters. Installs on the existing rudder bolts. Fits the Hobie 14 and Hobie 16. Class legal.   RESOURCES & SUPPORT ...

Standard 1 inch diameter mast sheave found on many Hobie Cat mast assemblies. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Just roll the jib up when you come into the beach or de-power if it gets too windy. Speed, excitement and convenience all rolled into one! Order a new furling jib separately or requires a re-cut of the standard jib.   RESOURCES & SUPPORT Hobie...

3/16 inch diameter clevis pin with a 3/4 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 3/16 in (5 mm) Pin Grip Length (B) is 3/4 in (20 mm) Sold...

1/4-20 HX Nylock nut from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Dimensions: 3/16" x .570   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Aft lacing strip for Hobie 16 and Hobie 14 trampolines. Fits Hobie 16 and Hobie 14   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts