Hobie 16

Mainsail Batten Protector Kit for use on Hobie mainsails. This is the OLD STYLE kit that is less commonly used. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Standard 7 hole shroud adjuster used on a variety of Hobie Cat shroud and forestay assemblies to connect wire to deck. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Stainless steel screw. Hobie Cat Company Part Application: component of the main traveler car assembly Stainless steel screw Dimensions: #10 (1/8" diameter), 1" long   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop...

A universal joint to connect tiller crossbar to the tiller extension on many Hobie sailboats. Standard yoke connector for Hobie sailboat tillers and cross bars. 1/4 inch pin and ring with 1/4 inch bolt. Works with Hot Sticks with deep yoke. Can be used...

Highest quality aircraft stainless wire coated with UV tolerant black vinyl coating for all of Hobie's wire products. Molded nylon handles are installed at the right place for easy in and out maneuvering. Also available in kits which include the trapeze...

Complete main halyard assembly for Hobie 16 with non comptip style masts. Includes the Hobie Main Halyard (Non Comptip), part number 20651011, along with 27 feet of 5mm line for the main halyard tail. This is a convenient assembly for quickly...

Simple, easy to carry, and easy to use. Comes complete with no-rot canvas bucket, premeasured line, shoulder pad (not shown) and snap. The righting bucket holds as much as 150 pounds of water to assist your body weight to right your catamaran.  ...

The Hobie 16 Neoprene Rail Kit provides excellent footing while out on the trapeze and cushions the non-skid areas. Eliminates abrasion on your skin or clothing because it sheds sand. Zero water retention. Made out of 1/8" thick knobby black neoprene...

Rudder casting for the Hobie 14 and 16 - upper right (starboard). Anodized aluminum alloy Includes: bolt, washer & cam stop plate Fits Hobie 14 and Hobie 16 catamarans   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat...

Batten that is 82 3/8", not tapered. Availability of the correct batten has often been a problem. The various models of Hobie Cats all use different batten and taper lengths. In earlier years, each model Hobie used a different color batten. The battens...

Hobie Cat doubled the number of grommets across the rear of the trampoline in 1983 to reduce stress and strengthen the trampoline. This kit includes 24 spur grommets and installation tools. Buy an additional 24 grommets to do the center lacing.  ...

A complete jib halyard assembly for the Hobie 16 including halyard wire, line, block and shackle. This is the standard halyward on all new Hobie 16 sailboats. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat...

Spring for the lower rudder casting on a Hobie 16. Part of the rudder locking kit For Hobie 14 and Hobie 16 catamarans   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

For Hobie 16 and late model 14. Kit contains appropriate 1/4" clevis pins, 3/16" clevis pin for traveler car, 1/4" clevis pin for mast step link. Split rings are included. The kit specifically contains: Clevis Pin 1/4" x.578 Grip x 2 Clevis Pin 1/4" x...

This is the block we include in our basic trap rig kits. No need to cut wires to install this block. Simply remove the clevis pin that acts as the sheave axle, slide the sheave out of the frame, place the frame through the trap wire thimble and reinstall...

The Hobie 16 Aussie style jib halyard kit reduces mast compression which allows easier tacking, better mast rotation and consistent mast bend! Complete kit includes hardware, 70 feet (Dyneema or equivalent) halyard line, zippered pouch, and instructions...